Category: Winchester Historic District

We continue our journey through the renovation process at the Samuel Noakes House at 101 West Cork Street/201 South Braddock Street. Updates are posted each Tuesday through the PHW blog, following the progress with virtual hardhat tours.

The previous entries may be found at the PHW blog at part 1, part 2, part 3, part 4, part 5, part 6, part 7, part 8, part 9, part 10, and part 11.

Last time, we saw some revisions for the meter relocation plans in the exterior work to the building caused by the solid limestone outcropping incorporated in the foundation. Because the meter location changed from the Board of Architectural Review’s approved application, the updated plans for the meters needed to be submitted to the BAR again. To make the application to the BAR more efficient, plans to restore the cornice facing Braddock Street and the exterior paint color selections were included with the meter relocation discussion.

The cornice restoration in particular required additional research. The original cornice had been removed at some point after 1976. Photographs of the Samuel Noakes house were not particularly clear, but appeared to show a bracketed cornice with molding. To identify what type of molding was once installed, the 1976 Winchester Historic District architectural survey sheets were consulted. Although the photographs were still unclear, the written description confirmed the cornice had modillions and an egg and tongue cornice.

The last item brought to the BAR was the exterior color selection. The plan was to differentiate between the Braddock Street side and Cork Street side with complimentary but contrasting colors. Braddock Street will remain red and white, and Cork Street will become blue (Kensington Blue or Evening Sky) with green trim (Central Park or Greenwich Village). The BAR approved the blue and green combinations, leaving the final selection between the four colors to the owner.

Inside the building, the Cork Street side fireplace was partially dismantled, cleaned, and rebuilt. As you may recall, the fireplace had been bricked in and an alternative heat source used the chimney for ventilation. The bricked up portion of the fireplace was opened once more, uncovering a deteriorated but partially legible fireback. The opening made for the later stove was filled in during the reconstruction, restoring the original appearance of the fireplace.

Cornice reconstruction research

Cork Street side fireplace rebuilt

We continue our journey through the renovation process at the Samuel Noakes House at 101 West Cork Street/201 South Braddock Street. Updates are posted each Tuesday through the PHW blog, following the progress with virtual hardhat tours.

The previous entries may be found at the PHW blog at part 1, part 2, part 3, part 4, part 5, part 6, part 7, part 8, part 9, and part 10.

Work this time focuses on the HVAC and electrical systems. One of the goals of the rehabilitation was to incorporate the electric service more elegantly into the building and reduce the visible exterior wires and make the meters less noticeable on the facade. As is so common in Winchester, limestone made the conceptual electrical trench impossible. The house is built on part of the limestone shelf encountered in the side yard, and the excavation of the trench could undermine the house’s foundation. An alternate relocation plan is drawn up for submission to the Board of Architectural Review and Shenandoah Valley Electric Cooperative.

Masonry work begins

The rear shed wall is removed

Limestone puts a crimp in the meter relocation plans

HVAC bulkheads go in

The electric rough-in work is started

John Chesson has graciously offered to share his story and images of his ongoing adaptive reuse project at the Samuel Noakes house, 101 West Cork Street/201 South Braddock Street with PHW. We will be releasing these stories through the PHW blog in the coming weeks, following the progress with virtual hardhat tours.

The previous entries may be found at the PHW blog at part 1, part 2, part 3, part 4, part 5, part 6, part 7, part 8, and part 9.

The Cork Street side yard had a limestone retaining wall that was beginning to buckle. Walls bow out over time when the area behind the wall does not allow for proper water drainage. The plan to tackle this was to rework this area and create a new path through the wall to the Cork Street apartment. Excavation for this phase of the project was a bit more involved than expected, because under the top layer of soil was a limestone shelf. The concrete patio slab was also removed at this point to rework the entrance to that side of the building.

Work continues inside, as well. The half bath area on the Cork Street side is framed in, and more demolition is underway in the basement. The work in the basement reveals some telltale signs the building is as old as reported by the local historians Quarles and Russell, including machine cut nails typical of the early 1800s. To read more about the study of nails and their importance in archeology and dating construction, you may read “Nasty Rods of Rust and Dirt” at Curtin Archeological Consulting, Inc.’s blog. A list of further references in the article will get you started on visually identifying the era from which a nail dates. Nails, along with saw marks in wood, are some of the best ways to estimate the age of a building of uncertain construction date.

Work moves outside to tackle a failing limestone wall

The half bath area is framed out

More demolition is underway in the basement

John Chesson has graciously offered to share his story and images of his ongoing adaptive reuse project at the Samuel Noakes house, 101 West Cork Street/201 South Braddock Street with PHW. We will be releasing these stories through the PHW blog in the coming weeks, following the progress with virtual hardhat tours.

The previous entries may be found at the PHW blog at part 1, part 2, part 3, part 4, part 5, part 6, part 7, and part 8.

This time, we see some of the first coverings which will be applied to the exposed walls, a foam barrier. Insulation is one of the key ways to make an existing building more energy efficient. In general, this much stripping of wall coverings would be too much hassle, cost, and loss of historic fabric to make insulating masonry walls worthwhile. Since so much of the building has been stripped, the insulation is sensible to add at this point in the project.

If you live in an older home and are considering upgrading your HVAC and/or adding more energy-efficient insulation, you should refer to the National Park Service’s Technical Preservation Briefs #3: Improving Energy Efficiency in Historic Buildings and #24: Heating, Ventilating, and Cooling Historic Buildings. The National Trust for Historic Preservation also has links to more resources on insulation. In general, it is less invasive and less likely to cause hidden damage to upgrade and maintain existing systems, utilize the historic ventilating systems in place, insulate areas with exposed structural members like attics and basements, add storm windows, and weatherstrip and caulk openings. Improperly applied insulation techniques will do more harm than good in an older home by holding moisture and causing rot, structural damage, and exterior paint failure.

Work also continues in a location we have not seen for a while, the barbershop area at Braddock Street level. Some of the previous creative uses for the space, like plumbing, air conditioning units, and lighting, will be better addressed during the renovation to make the most of the commercial area.

The installation of the foam barrier in the apartment areas

Work moves to the former barbershop area

John Chesson has graciously offered to share his story and images of his ongoing adaptive reuse project at the Samuel Noakes house, 101 West Cork Street/201 South Braddock Street with PHW. We will be releasing these stories through the PHW blog in the coming weeks, following the progress with virtual hardhat tours.

The previous entries may be found at the PHW blog at part 1, part 2, part 3, part 4, part 5, part 6, and part 7.

Last time, we saw the work begin to shift focus from making the building structurally sound to making the building function in 2012. As is typical in a renovation project, a few plans changed along the way and some additional plaster demolition occurred around the Braddock Street fireplace. This time, a similar reveal is undertaken in the upstairs fireplace.

In addition to looking at the bones of the structure, the HVAC system as well as plumbing lines are starting to take shape throughout the building. These systems are almost always some of the most difficult to retrofit into an older building with elegance. Being able to install or upgrade the HVAC and plumbing when the building’s structure is mostly exposed is the most efficient way to work with these often cumbersome systems.

The upstairs fireplace plaster is removed, similar to the downstairs reveal

More planning and work for HVAC and plumbing

John Chesson has graciously offered to share his story and images of his ongoing adaptive reuse project at the Samuel Noakes house, 101 West Cork Street/201 South Braddock Street with PHW. We will be releasing these stories through the PHW blog in the coming weeks, following the progress with virtual hardhat tours.

The previous entries may be found at the PHW blog at part 1, part 2, part 3, part 4, part 5 and part 6.

Last time, the final framework began going into the house and defining rooms. That work continues during this update. As you can see, with the framing going in, the work is shifting focus from making the building structurally sound to making the building function in 2012. Wiring, plumbing, and lighting needs are being reconciled with stone walls. The house even yields a few more surprises during some additional demolition.

More joist replacements and salvage from the Braddock Street side kitchen area

Framing in the Braddock St. side, upstairs and downstairs

Work in the Cork St. side, and planning for modern conveniences

Additional work leads to some minor change in plans, several surprises, as well as clever solutions for accommodating lighting, plumbing, and wiring in tricky locations

John Chesson has graciously offered to share his story and images of his ongoing adaptive reuse project at the Samuel Noakes house, 101 West Cork Street/201 South Braddock Street with PHW. We will be releasing these stories through the PHW blog in the coming weeks, following the progress with virtual hardhat tours.

The previous entries may be found at the PHW blog at part 1, part 2, part 3, part 4, and part 5.

Last time, some temporary framework had been installed to help raise the sagging joists. Now the final framework is going into the house. Rooms are once again taking shape in the vast envelope that had been revealed in the demolition phase. With a bit of imagination, you can begin to envision the final layout of the apartments.

Framing begins at the Braddock Street side

More material arrives and more framing starts to define the interior spaces

Details of the large replaced joist in the Braddock Street side

We have nearly caught up to the current progress at the Noakes house. The posting schedule will be readjusted to Tuesdays only, so the next installment will be posted on July 24. We’ll see you then!

John Chesson has graciously offered to share his story and images of his ongoing adaptive reuse project at the Samuel Noakes house, 101 West Cork Street/201 South Braddock Street with PHW. We will be releasing these stories through the PHW blog in the coming weeks, following the progress with virtual hardhat tours.

The previous entries may be found at the PHW blog at part 1, part 2, part 3, and part 4.

As we saw last time, the house has been stripped to its most open state. Now some temporary framework is being installed in preparation for beefing up the sagging structural members in the house. Note the jacks in the framework, lifting up the sagging portion in increments.

As well as the framework, a number of salvaged items, bottles, and newspapers are on display, including a medicine bottle from Dr. W.J. Whitlock for kidney stones, a stamp pad patented in 1881, and Winchester Evening Star newspapers from 1901.

Temporary framework

More salvage images

Items found in the house in one final area of demolition

The next installment will be posted on Tuesday, July 17 as the PHW office will be closed Friday for an out of office interview. Come back then for more pictures of the Noakes house.

John Chesson has graciously offered to share his story and images of his ongoing adaptive reuse project at the Samuel Noakes house, 101 West Cork Street/201 South Braddock Street with PHW. We will be releasing these stories through the PHW blog in the coming weeks, following the progress with virtual hardhat tours.

The previous entries may be found at the PHW blog at part 1, part 2, and part 3.

The Noakes house has been taken down to the bones of the building, exposing the framing and along the way, some structural problems. Most notably, the columns and casework in the Braddock street side were removed for the installation of new structural members after it was found the building was unsound. Other salvaged items are laid out in the house, waiting to find a new lease on life.

These images capture the most visually intimidating but exciting portion of a house renovation. With layers of changes stripped away, the possibilities for the building’s new use seem almost endless. Enjoy this glimpse into the Samuel Noakes house at its most open. From here, the building will start to reshape into its future use.

Cork Street interiors

Braddock Street interiors

In the upcoming installments, we’ll start to see the change from demolition to construction. Join us again on Tuesday for another look at the progress at the Noakes house.